The sysinstall utility is the installation application provided by the FreeBSD Project. It is console based and is divided into a number of menus and screens that you can use to configure and control the installation process.
The sysinstall menu system is controlled by the arrow keys, Enter, Tab, Space, and other keys. A detailed description of these keys and what they do is contained in sysinstall's usage information.
To review this information, ensure that the Figure 3-5, then press Enter.entry is highlighted and that the button is selected, as shown in
The instructions for using the menu system will be displayed. After reviewing them, press Enter to return to the Main Menu.
From the Main Menu, selectwith the arrow keys and press Enter.
This will display the Documentation Menu.
It is important to read the documents provided.
To view a document, select it with the arrow keys and press Enter. When finished reading a document, pressing Enter will return to the Documentation Menu.
To return to the Main Installation Menu, selectwith the arrow keys and press Enter.
To change the keyboard mapping, use the arrow keys to selectfrom the menu and press Enter. This is only required if you are using a non-standard or non-US keyboard.
A different keyboard mapping may be chosen by selecting the menu item using up/down arrow keys and pressing Space. Pressing Space again will unselect the item. When finished, choose theusing the arrow keys and press Enter.
Only a partial list is shown in this screen representation. Selectingby pressing Tab will use the default keymap and return to the Main Install Menu.
Selectand press Enter.
The default values are usually fine for most users and do not need to be changed. The release name will vary according to the version being installed.
The description of the selected item will appear at the bottom of the screen highlighted in blue. Notice that one of the options isto reset all values to startup defaults.
Press F1 to read the help screen about the various options.
Pressing Q will return to the Main Install menu.
The UNIX® or FreeBSD. Use the arrow keys to select and then press Enter to start the installation.installation is the option recommended for those new to